Let us know what the surface treatment process of titanium plate is like
Alloying on the surface of titanium plate can also be called a coating, which has the advantages of strong bonding force, wear resistance and corrosion resistance compared with the oxide coating of palladium on titanium.
Aluminizing the surface of the product can reduce the hydrogen absorption tendency of titanium. It is a good aluminizing condition to mix 88 percent alumina, 4 percent aluminum fluoride and 8 percent aluminum powder and coat it on the titanium workpiece. The temperature is 810 degree .
The thickness and structure of the aluminized layer depends on the holding time. Using the infiltration method to aluminize, a thin coating with a thickness of about 2 mm can be obtained by diffusion in a short time, and the bonding force is good and does not affect the mechanical properties of the substrate. main coating
Composed of a titanium oxide phase, it forms a very effective barrier against hydrogen permeation.
After the titanium plate is plated with palladium, it can be heated by different methods to make the palladium-plated layer diffuse to the surface area of the titanium tube to form a titanium-palladium alloyed layer on the surface layer, thereby increasing the corrosion resistance. heating expansion
Dispersion or laser surface remelting are feasible in principle. Using a laser to irradiate the titanium surface to make it melt and condense quickly, the 150-micron palladium-plated film deposited by vacuum in advance can be quickly melted to form an effective palladium alloy.





